Contact Us
0086 18725652711
You are here: Home > Products article

How to maintain stainless steel fountain pump

Stainless steel fountain pump is a pump directly connected to the submersible pump, can be directly into the water to run. Structure slender, divided into single or multi-level. Applicable to agricultural irrigation and drainage, construction drainage, ponds, fish ponds, fountains and so on. Stainless steel fountain pump in the use of attention to the operation method, sampling in the daily maintenance and maintenance and maintenance should also pay attention to ensure the safe use of equipment to avoid mechanical losses. Stainless steel fountain pump maintenance and maintenance methods need the following points Note:
       1, in use to check the stainless steel fountain pump and pipe and the junction of any loose phenomenon.
       2, to the bearing body by adding bearing lubricating oil, oil level should be observed in the oil standard center line, the oil should be replaced or added.
       3, if the stainless steel fountain pump in a long-term disabled state, the need for the pump to open the water control, and the rotating parts and joints coated with grease installed, properly kept.
       4, off the water pipe gate valve and outlet pressure gauge and import vacuum table.
       5, jog motor, try motor steering is correct.
       6, start the motor, when the normal operation of the stainless steel fountain pump, open the outlet pressure gauge and import the vacuum pump, depending on the appropriate pressure to open the gate valve, and check the motor load situation.
       7, try to control the flow of stainless steel pumps and head in the range marked on the signs to ensure that the stainless steel fountain pump in the most efficient operation, in order to obtain the maximum energy saving effect.
       8, stainless steel fountain pump in the course of running, the bearing temperature can not exceed the ambient temperature 35C, the maximum temperature shall not exceed 80C.
       9, such as the discovery of stainless steel fountain pump with abnormal sound should immediately stop to check the cause.
       10, stainless steel fountain pump to stop using, first turn off the gate valve, pressure gauge, and then stop the motor.
       11, stainless steel fountain pump in the first month of work, after 100 hours to replace the oil, after each 500 hours, oil change once.
       12, often adjust the packing gland, to ensure that the filling room inside the normal drip (to drop the leakage is appropriate).
       13, regularly check the wear of the sleeve, wear a large after the timely replacement.
       14, stainless steel fountain pump used in the winter season, after parking, the need to pump the surface, without water, to prevent cracking.